StageSource™ L2t is designed to be the world’s most versatile loudspeaker system for musicians on the go. Using six powerful DSP-based Smart Speaker modes, you can optimize the speaker’s output for a variety of performance scenarios including front-of-house PA, floor monitor, personal PA, keyboard backline, acoustic guitar backline, or with a multi-effects guitar processor as a high-performance electric guitar speaker system. An onboard accelerometer and pole-mount sensors automatically detect the speaker’s orientation and set the Smart Speaker mode accordingly.
StageSource L2t can function as a self-contained live sound solution. With a full-featured onboard mixer including multiple inputs for microphones, instruments, external mixers and MP3 players, L2t delivers all of the tools you need for great live sound.
Sweeten any vocal or instrument using the 3-band EQ with sweepable mid, plus Smart Mod and Smart Reverb effects on each input channel. Use Line 6 Acoustic Guitar modeling to add depth and warmth to any acoustic guitar fitted with piezo pickups. Eliminate squeals from your performance with onboard 12-band feedback suppression and an output limiter. The combination of effects, acoustic guitar modeling and feedback suppression make the L2t a powerful live sound solution for acoustic musicians
In live sound situations where two or more speakers are needed, StageSource products use a proprietary digital networking protocol called L6 LINK™ to simplify setup. Loudspeakers will automatically self-configure, pan stereo signals, adjust Smart Speaker modes and perform system-wide optimization. Add StageSource L3s subwoofers to the mix and the system automatically sends them the summed signals and sets the crossovers. When combined, Line 6 live sound products form an intelligent ecosystem that sets up faster and helps you sound your best.
The 800-watt, two-way, bi-amped speaker system and tour-grade plywood enclosure combine to deliver great power and reliability. The innovative multi-function design makes StageSource L2t perfect for a wide variety of applications—stacked on the floor or stage, pole-mounted, positioned horizontally as a floor monitor, used as instrument backline with Virtual Tilt-back, or flown with the integrated M10 suspension points.
The electro-acoustic configuration and powerful DSP implementation of the StageSource L2m loudspeaker make it possible to adapt its output to a variety of applications. When you choose a Smart Speaker mode, the system adjusts crossover points, component levels and dynamic control, ensuring L2m performs optimally in each scenario.
The two-way, bi-amplified design delivers exceptionally balanced, clean and articulate reproduction of live sources and pre-recorded material. A 1” exit high-frequency compression driver is matched to a precision-engineered, 100x50-degree, constant-directivity waveguide, which delivers consistent coverage to ensure everyone in the audience enjoys the same acoustic experience. The 100-degree horizontal dispersion is wide enough for solo use yet controlled enough for arrayed pairs. The 50-degree vertical coverage reduces acoustic smear from reflective sound surfaces, as minimal energy is reflected off of ceilings and floors.
StageSource L2t uses an internal accelerometer, optical sensors and DSP to accelerate setup and optimize the sound of your system. Based on the information the system detects, it selects the right Smart Speaker mode for the application, and automatically adjusts its performance.
For example, when the unit is powered on in a horizontal position, it automatically selects Floor Monitor mode. This mode provides a slight reduction in low-frequency content to counteract coupling when placing the speaker on the floor.
If any "backline" mode is chosen (Keyboard, Acoustic Guitar, Electric Guitar), the L2t then checks its orientation (via the accelerometer) and looks to see if it is on a pole (via the pole sensor). If the speaker is vertical and not on a pole, the L2t activates Virtual Tilt-back, which optimizes the speaker tuning to achieve an upward tilt to its main axis. This helps aim the sound upward towards the performer's ears when the speaker is placed on the ground. If the speaker is on a pole, it doesn't activate Virtual Tilt-back because it assumes that the speaker is elevated and aimed in the desired direction.
Since feedback can ruin a performance, StageSource L2t uses intelligent 12-band feedback suppression to identify the problem frequencies and adjust levels without affecting the overall sound.
L2t feedback suppression continuously analyzes the audio signal, identifying frequencies that have the characteristics of feedback (steady frequencies with few overtones, rising in amplitude) and then applies a narrow notch filter to remove the offending frequency. L2t feedback suppression can remove up to 12 independent feedback frequencies. You can set the feedback analyzer to one of three modes, depending on how aggressively you want the analyzer to seek out potential feedback frequencies.
Multi-function design combined with powerful Smart Speaker modes and digital networking provides true scalability whether you’re using a single L2t as a standalone PA or multiple L2t and L2m speakers as main PA, monitors and backline. Add StageSource L3t/L3m loudspeakers and L3s subwoofers to customize a configuration that meets your live sound or installation needs.
StageSource L2t is ready for whatever the road can throw at it. The robust enclosure is constructed of heavy-duty plywood, and features a tour-grade steel grille with protective screen backing that shields the drivers from impact damage.
If you need to fly the speakers, each StageSource L2t features four professional M10 suspension points with a pull-back.
- 2 mic/instrument combi inputs with -20dB pad switches and gain pots
- 1 XLR line aux input
- 1 stereo RCA aux input
- 3-band EQ with sweepable mid
- Acoustic guitar modeling
- 12-band feedback suppression
- Smart Reverb and Smart Mod effects
- XLR outputs
- Master volume